REM AutoFit
Tailor your fittings with REMs in just 2 minutes 30 seconds1
REM AutoFit in Oticon Genie 2 conveniently and efficiently personalises each fitting to the client’s unique ear acoustics.
Upgrade your fitting practice
Because gain in fitting software is usually based on an average ear canal, it does not always perfectly suit the particular shapes and sizes of each individual’s ears. REM AutoFit takes each individual’s ear acoustics into consideration by measuring, automatically adjusting and verifying the prescribed gain in the client's ears.
Benefit from Real Ear Measurements (REM)
- Comfortable fitting with quick verification
- More time for counselling and validation
- Optimal hearing aid benefit thanks to verified fitting2,3
- May aid in reducing number of visits in the clinic4
- Improves client perception of hearing care professionals and hearing aids5
Verify and validate for a more efficient business
REM AutoFit streamlines your workflow to give each of your clients a shorter and more comfortable fitting experience during hearing aid verification. With the time you save by integrating REM AutoFit into your fitting process, you can devote valuable minutes to other aspects of clinical practice such as validation and counselling, or see more clients during the day.
What’s more, because verification and validation can reduce the return visits that a client makes on average4, incorporating REM AutoFit into your fitting process is a smart investment that can pay multiple dividends in time and cost savings.
All inside Oticon Genie 2
REM AutoFit communicates with the REM system to run the measurements. Oticon Genie 2 can then automatically adjust the hearing aid gain to match the target, while giving you the flexibility to manually fine-tune and verify the fitting. This gives you a single software program to launch, work in, and maintain.
Featured in the latest version of REM Autofit
Probe tube placement guide for REM
Simple, real-time ‘parking assistance’ helps you place probe tubes for real ear measurements in the ear canal, giving you greater confidence and minimising the risk of poking a user’s ear drum, or placing a tube too far from the eardrum and affecting REM accuracy.
Features include:
- Automatic and manual fine-tuning and measurement
- Automatic open fit calibration
- Choice of insertion gain or speech mapping verification6
- International speech test signal (ISTS)6
- Simultaneous binaural measurements6
- Flexible fitting verification against any rationale in Oticon Genie 2, including VAC+6 and NAL
- Compatible with Interacoustics, MedRx, Otometrics, Sivantos and Auditdata using HIMSA's Inter Module Communication protocol 2 (IMC 2)7
- Compatible with Audioscan equipment using Verifit®LINK (from Oticon Genie 2 | 2018.2)7
Part of Oticon’s clinical experience
Optimal hearing care is life-changing
Oticon’s clinical offerings go far beyond our hearing aids, helping you deliver life-changing care for your clients.
We make it easy and efficient to apply an optimal, person-centred clinical approach in your unique setting, throughout every stage of rehabilitation, so you can achieve optimal outcomes for each individual.
References
- With IMC2 compatible REM systems REM target matching can be done in under 1 minutes and 50 seconds. With VerifitLINK REM target matching can be done in under 2 minutes and 30 seconds. Rumley & Crowe (2019). REM AutoFit: speed and accuracy. Oticon Whitepaper.
- Kochkin et al. (2010). MarkeTrak VIII: The impact of the hearing healthcare professional on hearing aid user success.
- Abrams et al. (2012). Initial-fit approach versus verified prescription: Comparing self-perceived hearing aid benefit.
- Kochkin (2011). MarkeTrak VIII: Reducing patient visits through verification and validation.
- Amlani et al. (2016). Improving patient perception of clinical services through real-ear measurements.
- May vary depending on REM system.
- Always ensure latest REM and Oticon Genie software.